Ship design may be affected in other ways. The greatest potential for shipboard application is in the supply department, where 3D printers could replace much of the ship stores of infrequently used parts. As pointed out by Matt Hipple at the Center for International Maritime Security’s Nextwar Blog  , instead of spending weeks tracking down a piece of equipment (or worse, discovering the supply inventory is empty and the subcontractor has gone out of business), a logistics specialist could scan the barcode on the part that needs replacing or do a quick search to find the design and begin printing in minutes. While the base materials will need to be retained on board, they will reduce excess void space from oddly shaped or packaged pieces. (Goodbye Styrofoam peanuts and bubble-wrap!)
It won’t make sense to rely on 3D printing for every repair part or consumable. High-volume, heavy use items such as fluorescent light tubes or paper might still be cheaper off the production line. It also might not make sense to carry every rare raw material needed in parts with low rates of failure. Even then, if a failure does occur, printed stand-in parts might allow equipment to function at reduced capacity until a true replacement can be installed.
And it’s not just standard parts that can be printed. Custom-fit replacements, shoring, and patching would be an easy adaptation. Ammunition and the drones that many anticipate playing a greater role in future warfare could also be produced shipboard if the right infrastructure is in place. Just last month the University of Southampton announced the successful printing of an entire working unmanned aerial vehicle  —minus its engine. Even food (chocolate cupcakes) and living tissue have been successfully printed, raising the possibility of new ways of doing business in the galley and medical spaces  . At the most radical end of potential innovation is that of resupplying the base materials.
Hipple envisions a day  when the warfighters in the field are able to harvest the stock they need to feed the printers directly from recycled waste or raw materials. Regardless of the source of the base material the military’s use of 3D printers might also disrupt the business model of purchasing finished components from contractors. Instead we may see licensing for a set number of printable copies or an outright purchase of the design. Either case greatly mitigates the fear of ending production lines.
So what’s next? With most additive manufacturing breakthroughs and development occurring in the private sector many opportunities exist for experimentation and figuring out the unanswered questions. What base materials and what pre-printed parts make sense to embark? At what unit level would a printer be useful kit for the Marines? What challenges arise from printing at sea? What skills are needed to operate and repair the printers? Should the base materials be fed locally or integrated into a central distribution system? The sooner the Navy and Marines set about answering the questions the sooner they will most fully be able to take advantage of this promising new technology. To its credit, the Army is sending a 3D printer to southern Afghanistan to do exploring 3D printing technology as part of its Expeditionary Lab–Mobile  . The Navy and Marines should similarly embrace experimentation, or at least seek to learn from the Army’s experiment.
Scott Cheney-Peters is a surface warfare officer in the U.S. Navy Reserve and the former editor of Surface Warfare magazine. He is the founding director of the Center for International Maritime Security  . The opinions and views expressed are his alone.